Description
The Visio Install kit is supplied complete with 5m of 150 LED 5050 RGB tape, a controller with 24 key IR remote and mains power supply ready for installation. These ultra bright colour strips have an IP54 rated protective resin coating and give a bright constant smooth effect and can be fitted where a continuous linear halo of light is required. This LED tape can be cut at every 3 LEDs (50mm) and is a 12V system. The controller allows you to select from the built-in RGB programs via the IR remote. Each of the built-in programs can be set to a preferred speed and any of the static colours can be set to a preferred brightness by using the brightness/speed control buttons.
Features
Strip features:
3M self adhesive backing
IP54 gel coating
Can be cut at 50mm (3 LED) intervals
High output and low power consumption
Roll length: 5m
LEDs per metre: 30
390 lumens/metre (all channels driven full)
IR remote features:
Builtin programs
16 static colour buttons
Adjustable brightness/speed buttons
On/off button
Programme selection buttons
Static colour
change and fade modes
Technical Specifications
Strip specifications:
Power supply: DC 12V
Power consumption: 1.2A/5m all channels driven full
SMD LED: 150pcs/5m
Beam angle: 120�
Dimensions: 10 x 5000mm
Weight: 0.23kg
Controller specifications:
Maximum total output 6A
Power supply: DC 12V (adapter included)
Dimensions: 70 x 35 x 21mm
Weight: 0.2kg
IR remote specifications:
Power supply: Lithium CR2025 battery (supplied)
Dimensions: 83 x 51 x 7mm
Weight: 0.2g
Dimensions
Height: 6.5cm
Width: 20.5cm
Depth: 20.5cm
Weight
0.7kg